6300 Series Low Energy Operator

The Norton 6300 Series Low Energy Operator offers a broad set of intelligent functions, such as latch boost, latch retraction and obstruction detection to safely secure a variety of moderate to high traffic openings. A unique design with one of the slimmest profiles available allows the 6300 to blend more seamlessly with the frame while fitting challenging applications with minimal header space. A modular design and simple controls also make for easy installation and setup.

Specifications

Door Control (interior) (exterior) closing force shall be adjustable to ensure adequate closing control. Door Operator shall simulate conventional door closer opening and closing forces unless the power operator motor is activated. Door Operator shall have electronic backcheck to cushion the door speed if door is opened violently. [(Door Operator shall be AUTOMATICALLY ACTIVATED by either a slight push or pull in the direction of opening swing - Push and Go.) (Door Operator shall be SELECTIVELY ACTIVATED by external initiating device, i.e. wall switch, etc.) (Door Operator shall be both AUTOMATICALLY ACTIVATED and SELECTIVELY ACTIVATED.)] Operator shall have selectable latch boost to provide additional closing force to overcome conditions that may prevent door from latching. Unit shall have delay switches for motor activation, electric lock interfacing, and hold open time. Units shall interface with latch retraction exit devices or similar products and have 24VDC @ 1.3A maximum (less accessories) output for connection of electric strike, lock, radio frequency receiver, etc. Unit shall have a three-position Selector Mode Switch that will permit the unit to be switched "ON" to monitor for function inputs, switch to "H/O" for infinite hold open function or switched "OFF" which will disable function inputs allowing unit to be used as a manual door closer. Unit shall be U.L. Listed for automatic closing door. The Unit shall be adjustable to provide compliance with the requirements of the Americans with Disabilities Act (ADA). Unit shall be certified by BHMA to meet A156.19 requirements. Unit shall meet UL325/991, UL10C standards.

Finishes

689
Aluminum

690
Statuary Bronze

Downloads

Catalog

Brochure

Installation Instructions*

Templates

Videos

*Note: Wiring Diagrams are included in installation instructions document

Features

  • Push and pull side mounting
  • Non-handed
  • Activated by push button, hands-free and
  • RF devices
  • Door size: min width 36", max width 48", max weight 200 lbs.
  • Power assist
  • Push and go (selectable)
  • Obstruction detection (open and close)
  • Aesthetically pleasing, slim profile

...

  • Modular design
  • Lock release feature for enhanced security
  • Latch boost
  • Selectable mode switch (off, on, hold open)
  • Adjustable opening force
  • Adjustable closing power
  • Blow open and blow close for smoke ventilation
  • 2 year limited warranty

Functions

  • Power Assist
    • Senses the door is being opened manually and applies small amount of power to assist user in opening the door with force less than 5 lbs.
    • Door opens only as far as it is moved manually, then closes once released
  • Push and Go (selectable)
    • As the door is manually opened, the operator “senses” movement and opens door to the full-open position
  • Obstruction Detection
    • Open - Door closes if it hits an obstruction while opening
    • Close - Door will reverse to open position if it hits an obstruction while closing
  • Close (Selectable - Stop on Stall) - Door will stop once it hits an obstruction and will rest against the obstruction until removed

...

  • Motor Startup Delay
    • Delays operator opening for locking hardware
  • Infinite Hold Open
    • Door will hold open at set position until power is turned off
  • Latch Boost (Selectable)
  • Additional closing force to overcome conditions that might otherwise prevent the door from latching (ex: weather stripping, stack pressure)
  • Selector mode switch (3 position)
    • Off - door functions as a standard door closer
    • On - door functions as an automatic low energy operator
    • Hold Open - activates the unit to the hold open position

Benefits

SMART

  • Latch boost ensures door closes to secure facility
  • Occupant safety enhanced by obstruction detection, power assist, and push and go functions
  • Inputs available for security override and fire safety

GOOD LOOKING

  • Unique design with slim profile blends seamlessly with frame
  • Cover spans full frame for 36” doors; accommodates doors up to 48”
  • Low profile easily fits applications with minimal header space

 

...

SIMPLE

  • Modular, four-piece design allows for one-person installation
  • Heavy-duty back plate serves as template simplifying and speeding installation
  • Unit learns door properties (approximate weight) during installation for easy programming and set-up
  • Easy to use controls simplify setup
  • USB port allows for quick software updates
  • Tools such as BILT interactive installation instructions and installation video offer step-by-step visuals for operator installation, setup and programming

Applications

Moderate to high traffic openings are ideal applications for the 6300 Series Low Energy Operator. Whether an interior or exterior door, the 6300 Series is a low energy door control solution that allows facilities to meet ADA (Americans with Disabilities Act) requirements by enabling a door to be operated through the use of push buttons, wave switches or hands-free radio frequency devices.

...

  • Corridors
  • Hospitals
  • Universities Entrance Doors
  • Schools
  • Theaters
  • Banks
  • Large office buildings
  • Large department stores
  • Stores

Electrical Data

  • Power input 120 VAC, 3A, 60Hz
  • Current draw 1.5A

...

  • Power output 24VDC @ 1.3A max draw (less accessories)

Certifications

 

  • ANSI/BHMA A156.19 certified
  • UL325/991 certified
  • UL10C listed for positive pressure fire test

 

...

 

  • Complies with requirements for the Americans with Disabilities Act (A.D.A)
  • Manufactured in an ISO 9001 and ISO 14001 certified facility

 

Questions?

Customer Service:
800.438.1951 x Ext 6701
(8am - 4:30pm Eastern)

 

Technical Product Support:
800.438.1951 x Ext 6030
(8am - 4:30pm Eastern)

Sales Agency Locator