The 5800 Series ADAEZ PRO PLUS is a compact door operator that is simple to install and use.  This heavy-duty, low energy operator is intended for high traffic applications that require continuous duty automatic operation like schools/universities, banks, retail outlets or hospitals. This operator includes a 24 VDC hardwired transformer kit that allows the non-handed unit to plug directly into an outlet. Featuring Push-and-Go and Power Close, the 5800 is available for push or pull mounting and ships standare with two RF wireless push buttons.

Not sure what to order? Try the 5800 ADAEZ PRO COMPLETE, which bundles all of the unique configurations of the PRO and PRO PLUS into one package. The COMPLETE unit can be mounted on either the push or pull side of the door and will work as a regenerative power system or as a continuous duty operator. It also includes both black and aluminum dress covers.


A. Automatic Door Operator

  1. Provide low energy automatic door operator complying with requirements of ANSI A156.19.
  2. Provide an operator with adjustable opening and closing forces that meet the provisions of ANSI 117.1 and the Americans with Disabilities Act.
  3. Provide an operator with a regenerative drive system which charges the on-board battery pack when operator is opened manually and which requires no external electrical power.
  4. Provide an operator which, upon installation, will determine door size and weight and automatically tune controller to operate within ANSI A156.19 and 117.1 standards. Operator shall also have the following adjustable functions:
    1. Opening/Closing Speed.
    2. Hold-open Time.
    3. Close Check.
    4. Opening/Closing Force.
  5. Provide operator with on-board diagnostics which will continually maintain control of door speed in wind or abusive environment condition.
  6. Provide operator which, when opened manually, utilizes a clutch mechanism that disengages the motor gearbox assembly upon opening, then re-engages during the closing cycle to control spring force for even and smooth operation throughout the entire opening and closing cycle.
  7. Provide operator that will continue closing door within ANSI A156.19 and 117.1 requirements without any external power supplied. Upon meeting an obstruction during the opening cycle the door shall remain under power for two seconds and then close under spring force; if the door meets and obstruction will closing, the door will maintain a closing force of 8 lbs or less.
  8. Provide operator capable of operating doors up to 48” wide, weighing up to 250 lbs, and successfully tested for 1,000,000, automatic cycles.
  9. Provide operator that will operate in climates with temperatures above -40° F and has a two year warranty.
  10. Provide operator with two stainless steel, 1-3/4” x 4-3/4” wireless, jamb mounted, push button transmitters with required signage. Locate push buttons as directed by architect and within ANSI 156.19 and 117.1 guidelines.
  11. Provide operator which utilizes a triangular hardened steel output shaft to connect door arm with a two piece tapered coupling for superior slip resistance.
  12. Provide operator and push button transmitter with circuit boards that have been specially coated to resist moisture and humidity making the electronics weather resistant.
  13. Provide operator with integral heavy duty cast aluminum shock absorbing arm, which when fully extended is in full tension eliminating the need for an auxiliary door stop.
  14. Provide operator with two architecturally finished covers and black powder coated frame, arms and mounting brackets.
    1. Black (693T)
    2. Aluminum (689)
Aluminum Cover


Powder Coated
Replaces Standard Black Cover



Available Kits

Pro Complete Kit

Push Side Mounting - Parallel Arm 

Narrow Style Push Buttons (2)

ADA1015P Hardware Kit:

PULL Mounting Hardware
 Regular Arm


Aluminum Cover





Push Side - Parallel Arm (illustrated) or
Pull Side - Regular Arm 

ADA1015P Hardware Kit:

ADA1025 Timer Kit

ADA1019-4 Push Buttons (Qty 2)





  • Continuous duty operation
  • Non-handed
  • 95 degree opening
  • Push or pull side mounting
  • Push-and-Go
  • Power Close
  • RF Radio Frequency stainless steel push buttons
  • Integral RF receiver

  • Shock absorbing arm
  • Black cover (standard); aluminum cover (optional)
  • 24 VDC Input Port
  • Auxiliary activation inport port
  • Built-in ON / OFF switch
  • Maximum door width - 48"
  • Maximum door weight - 250 lbs. 


  • 24VDC transformer kit allows unit to plug into an outlet
  • RF receiver paired with weatherized RF push buttons (included) for simple installation
  • Includes 24 VDC transformer, armored door cord with end links and 50 feet of low voltage connection cable
  • Power Close ensures consistent door latching
  • Push or pull side mounting available
  • Non-handed
  • Controls doors up to 48” wide and 250 lbs in weight

  • Push-and-Go - selectable on or off
  • Built-in battery back-up allows for over 2000 door activations after building power failure
  • Acts like a manual door closer
  • Grade 1 - heavy-duty, commercial design
  • Brushless DC motor/gearbox tested in excess of 10 million cycles
  • Dynamic braking for high wind applications
  • Electronic backcheck for abusive environments


  • ANSI/BHMA A156.19 certified
  • ETL tested to UL / cUL standard for automatic doors on fire & smoke barrier doors
  • Complies with requirements for Americans with Disabilities Act (ADA)

Typical Applications

  • Schools / Universities
  • Banks
  • Retail Outlets


  • Casinos
  • Hospitals